Monday, November 16, 2015

Prevention of Slip, Trips & Falls

Why is prevention of slips, trips and falls important?
In Canada over 42,000 workers get injured annually due to fall accidents. This number represents about 17% of the "time-loss injuries" that were accepted by workers' compensation boards or commissions across Canada (based on statistics from Association of Workers' Compensation Boards of Canada, 2011).

How do falls happen?
Statistics show that the majority (66%) of falls happen on the same level resulting from slips and trips. The remaining 34% are falls from a height.

Slips happen where there is too little friction or traction between the footwear and the walking surface. Common causes of slips are:
  • wet or oily surfaces
  • occasional spills
  • weather hazards
  • loose, unanchored rugs or mats
  • flooring or other walking surfaces that do not have same degree of traction in all areas

Trips happen when your foot collides (strikes, hits) an object causing you to lose the balance and, eventually fall. Common causes of tripping are:
  • obstructed view
  • poor lighting
  • clutter in your way
  • wrinkled carpeting
  • uncovered cables
  • bottom drawers not being closed
  • uneven (steps, thresholds) walking surfaces

How to prevent falls due to slips and trips?
Both slips and trips result from some a kind of unintended or unexpected change in the contact between the feet and the ground or walking surface. This shows that good housekeeping, quality of walking surfaces (flooring), selection of proper footwear, and appropriate pace of walking are critical for preventing fall accidents.

Good housekeeping is the first and the most important (fundamental) level of preventing falls due to slips and trips. It includes:
  • cleaning all spills immediately
  • marking spills and wet areas
  • mopping or sweeping debris from floors
  • removing obstacles from walkways and always keeping them free of clutter
  • securing (tacking, taping, etc.) mats, rugs and carpets that do not lay flat
  • always closing file cabinet or storage drawers
  • covering cables that cross walkways
  • keeping working areas and walkways well lit
  • replacing used light bulbs and faulty switches

Without good housekeeping practices, any other preventive measures such as installation of sophisticated flooring, specialty footwear or training on techniques of walking and safe falling will never be fully effective.

Changing or modifying walking surfaces is the next level of preventing slip and trips. Recoating or replacing floors, installing mats, pressure-sensitive abrasive strips or abrasive-filled paint-on coating and metal or synthetic decking can further improve safety and reduce risk of falling. However, it is critical to remember that high-tech flooring requires good housekeeping as much as any other flooring. In addition, resilient, non-slippery flooring prevents or reduces foot fatigue and contributes to slip prevention measures.

In workplaces where floors may be oily or wet or where workers spend considerable time outdoors, prevention of fall accidents should focus on selecting proper footwear. Since there is no footwear with anti-slip properties for every condition, consultation with manufacturers' is highly recommended.  Properly fitting footwear increases comfort and prevents fatigue which, in turn, improves safety for the employee.

What can you do to avoid falling at work?

You can reduce the risk of slipping on wet flooring by:
  • taking your time and paying attention to where you are going
  • adjusting your stride to a pace that is suitable for the walking surface and the tasks you are doing
  • walking with the feet pointed slightly outward
  • making wide turns at corners

You can reduce the risk of tripping by:
  • keeping walking areas clear from clutter or obstructions
  • keeping flooring in good condition
  • always using installed light sources that provide sufficient light for your tasks
  • using a flashlight if you enter a dark room where there is no light
  • ensuring that things you are carrying or pushing do not prevent you from seeing any obstructions, spills, etc.

Thursday, November 5, 2015

Detect Deter Report

It was 4 am and Security Guard (SG) Keith was making his rounds, when he encountered an open door leading to the employee parking lot. Upon further inspection he noticed that the door had been propped open using a folded piece of cardboard. So he immediately took photographic evidence of the open door and then stepped outside to survey the parking lot to see if he could view anyone loitering or within view. After not seeing anyone, he stepped back in through the open door and removed the cardboard. SG Keith then radioed in to the command post what he had discovered prompting all on-duty guards of the situation and thereby a sense of heightened vigilance. Finally, after completing his rounds he filed an Incident Report so that further action would be taken to address the event.

Does this sound like a plausible event? Did Security Guard Keith fulfil his duties? Were the actions of SG Keith able to achieve the Securitas mission? In the field of security a guard must be keenly aware of the important functions tied to their position. At the heart of it, and the reason private security was even established, lies a three prong role of the security guard - Detecting, Deterring, and Reporting. It is these tasks, which are also at the core of a Securitas guard's position, and which our clients are expecting from us in the course of a day's work. On the face of it this seems like a pretty straight forward concept, but one must understand all the interrelated assignments that are associated with these functions. To fully comprehend this let's examine each of the three major roles one by one.

Download our This Month's Spotlight from the following link: